SPD200K and SPD300K Series - Surge Protective Devices The SPD200K and SPD300K Series offers continuous protection from damaging voltage transients and electrical noise commonly found at the service entrance or distribution panel. The design of the SPD200K and SPD300K allows for installation flexibility and the robust design allows for installation in the most severe exposure locations. They are capable of handling the high-impulse, potentially damaging transients commonly found at the service entrance or distribution panels.
The SPD200K and SPD300K utilizes circuitry to monitor the status of all protection modes, including neutral to ground. Should protection be unavailable in any mode, the Green LED will be extinguished, and the Red LED will be illuminated. In addition, high isolation form C dry contacts provide remote monitoring of protection system failure, under voltage, phase and power loss. The SPD200K and SPD300K protection integrity monitoring indicates failure for both shorted or opened protection components.
These devices are built to meet your unique requirements, and are available in hardwire, three phase configuration with an internal rotary disconnect standard. They are designed for years of trouble free operation and require little or no operator intervention after installation.
Applications The SPD200K and SPD300K Series can be a facility-wide product family and may be installed from service entrances to distribution panels to branch panels.
Industrial Plants
Commercial Buildings
Institutional Facilities
Any facility that has an environment with electronics based equipment.
Features
Surge current capacity of 200 to 300 kA per phase
Metal, UL Listed /NEMA type 1/12/3R/4 enclosure standard.
Rotary disconnect and transient counter.
All modes transient protection (L-N, L-G, and N-G)
Form C dry contacts and audible alarm status indications
Internal/external monitoring, including neutral to ground.
