Automation Transformers - Floor Mount - Non-Ventilated 15 kVA to 150 kVA SolaHD encapsulated transformers are rated for hazardous locations as well as harsh industrial environments. Encapsulation and rugged enclosures protect the transformer from dust, moisture, and provide extra shock and vibration resistance. SolaHD transformers fully comply with the latest edition of the National Electrical Code.
Features
cULus Listed for Class I, Division 2/Zone 2 hazardous locations temperature classification T3C or T3
UL Listed/NEMA Type 1, 2, 3R, 4, and 12 encapsulated enclosure for indoor and outdoor service.
Electrostatically shielded for quality power
UL Class 200ËšC insulation system, 115ËšC (40ËšC Ambient) temperature rise under full load.
Gland plates standard for ease of conduit entry.
Gland plates allow for easy cable entry into an enclosure while maintaining enclosure rating, providing easier installation and the ability to rewire or relocate existing equipment easily over the life of the transformer.
Available in ANSI gray painted cold roll steel for standard NEMA 1, 2 3R, 4/12 or stainless steel (4X) that offers the same or better corrosion resistance, and looks like our standard NEMA finish.
Copper terminations on all units
Encapsulated with electrical grade silica and epoxy for industrial applications.
Related Products
Some SolaHD DC power supplies are available with Class I, Division 2 ratings or encapsulation.
Surge Protective Devices
Certifications and Compliances
All Models
Listed: E361435
UL 1561 or UL 5085-1, UL 5085-2
CSA C22.2 No. 47 or No. 66
RoHS Compliant
Accessories and Optional Design Styles
NEMA 4X Stainless Steel Enclosures
50ËšC Ambient temperature and other temperature classifications (T4, T4A or T3B) available
Additional configured transformer designs are available contact technical support (ex. copper, K-Factor and low temperature)
Replacement gland plates (SGP) for moves, adds and rework are available.
